15051-2
POLYVINYL CHLORIDE (PVC) DRAINAGE PIPE
1. Clear each pipe length, coupling and fitting of all debris and dirt before
installing.
2. Provide and use coupling pullers for joining the pipe.
3. Shove home each length of pipe against the pipe previously laid and hold
securely in position.
4. Donot pull or cramp joints.
Fabrication:
1. Cutting:
a. Usea hand saw or pipe cutter with blades (not rollers).
b. Examine all cut ends for possible cracks caused by cutting.
2. Connecting:
a. Solvent weld connections as recommended by the manufacturer.
b. Connect pipe and fittings only when temperature is above the minimum
recommended by the manufacturer.
c. Threaded adapters shall be connected only with plastic male into metal
female.
END OF SECTION
13089K
