15051-1
SECTION 15051
POLYVINYL CHLORIDE (PVC) DRAINAGE PIPE
PART 1 - GENERAL
1.1 DESCRIPTION
A. Work Included: Furnish and install PVC drainage pipe and fittings of the type (s)
and size (s) and in the location (s) shown on the Drawings and as specified herein.
B. Related Work Specified Elsewhere: "Pipe & Pipe Fittings - General" is specified in
this Division.
12 QUALITY ASSURANCE
A. Standards:
1. Pipe and fittings (interior) shall conform to ASTM D-2665S.
2. Pipe and fittings (exterior) shall conform to ASTM D-3034.
3. | Solvent cement shall meet the requirements of ASTM D-2564.
4. Shall have NSF seal of approval.
B. Acceptable Manufacturers:
1. Charlotte Pipe and Foundry Co.
2. Harvel
3. Cabot
4. Or approved equal.
PART 2 - PRODUCTS
2.1 MATERIALS
A. Pipe Outside Buildings:
1. Pipe and Fittings:
a. Virgin Type I, Grade I, or Type I, Grade 2 or as shown on the Drawings.
b. Pipe and Fittings: Gasketed style utilizing twin gasket coupling or single
gasket bell and spigot type.
c. Pipe Lengths: Laying length of 20 feet minimum.
B. Piping Inside Building:
1. Pipe and Fittings:
a. Solvent weld type with drainage type fittings.
b. Type I, Grade I, or Type I, Grade 2 or as shown on the Drawings.
2. Joints:
a. Solvent weld using approved pipe manufacturer's solvent.
b. Couplings: Same schedule as pipe.
C. Adaptors: When applicable, provide adaptors for connecting PVC to pipe
constructed from other materials.
PART 3 - PART 3 - EXECUTION
3.1 INSTALLATION
A. Jointing:
13089K
