16500-2
LIGHTING
identified index tab. Catalog cut sheets shall indicate fixture identification, 1.e., type
A, D, J, etc., and shall indicate where it will be used.
Information on each fixture shall include:
1.
2.
3.
4
5
6.
7.
8
9.
1
Manufacturer and Catalog Number
Dimensioned Construction Drawing(s)
Standard Catalog "Cut" Sheet modified to show any options/accessories to be
provided
Photometrics of each fixture
Lens/Louver Type for each fixture
Power Requirements
Ballast Type, Quantity and Rating
Socket Type/Position
Lamp Type , Quantity and specifications
0. Mounting Type and details of mounting equipment
1.4 DELIVERY, STORAGE AND HANDLING
A. Refer to Specification 16010 "Electrical - General" for this requirement.
PART 2 - PRODUCT
2.1 MATERIALS
Fixtures shall be identical in construction features, options and appearance to the
fixtures specified in the Lighting Fixture Schedule as shown on the contract
drawings. All fixtures shall be able to be pendant mounted.
A.
Lamps
1. Incandescent lamps shall be inside frosted, rated for 130 volt operation.
2. Fluorescent lamps shall be rapid start, F32T8/TL835, mid white (3500K, CRI
80+), unless otherwise noted.
3. Metal halide lamps shall be phosphor coated and suitable for the burning
position dictated by the luminaire.
4. High pressure sodium lamps shall be phosphor coated and suitable for the
burning position dictated by the luminaire.
5. Acceptable Lamp Manufacturers: General Electric, Osram/Sylvania, Phillips
or approved equal.
13089k
