“WATER” marked lid. Contractor is responsible to supply all miscellaneous piping, fittings and
other materials not mentioned above.
One yard hydrant and valve is missing (number 16 on the design plan). The contract will need to
dig at the approximate location marked in the field to locate the old hydrant stem and valve box.
This work is incidental to contract.
The number of gate valves and yard hydrants to be installed may be limited by the funding
available or constraints that may be encountered prior to installation. The City reserves the right
to eliminate yard hydrants at less critical locations depending on the outcome of the bid.
There are asphalt aprons around the primary and grit tanks that may be compromised during the
installation. It is assumed at these locations that a 1.5” thick patch will be sufficient. Asphalt
repairs at locations on. a main drive is impacted in around outside digester it should meet City
specs for a minor roadway or a minimum of 1’ gravel, 2” base and 1.5” top coat.
Sidewalk replacement shall be according to City details for sidewalk replacement. During
sidewalk repairs it will be necessary to remove and reset of curbing, which is incidental to the
sidewalk replacement.
All disturbed grass areas to be loam & seeded. All old yards and other debris shall be removed
by the contractor. Miscellaneous debris may be delivered at no additional cost. Delivery of
debris must be scheduled in advance with the Solid Waste Department and arrive at the facility
no later than 2pm.
