2. Under Division 9 Technical Specifications, changes have been made as detailed
below. As a result, the 2017 Pavement Preservation Technical Specifications Issued
on March 13, 2017 will be removed and replaced with the attached 2017 Pavement
Preservation Technical Specifications issued on March 30, 2017.
A. Item 403.11 Hot Bituminous Pavement, Machine Method revisions:
The reference to Appendix A was removed.
B. Item 403.12 Hot Bituminous Pavement, Hand Method revisions:
The reference to Appendix A was removed.
C. Item 404.11 Micro-surfacing revisions:
The following sentence was listed twice and one was removed, ‘“‘No crack sealant
material shall be applied in wet cracks or where frost, snow or ice is present, nor where
the ambient temperature is below 25 degrees F”.
Under, F. MEASUREMENT AND PAYMENT, the language was revised to read as
follows:
Crack Sealing with Polymer & Crumb Rubber Modified Asphalt Compound with
Reinforcing Fibers (Crack Sealing) will be paid by the gallon (Gal) of crack sealing
complete in place. Payment for Crack Sealing includes full compensation for material,
labor, transportation, and equipment necessary to complete this portion of the Bid
Schedule. No payment shall be made for materials delivered on site but not placed.
D. General revisions:
Spelling, grammar, and formatting corrections were made to specifications where
required.
E. Additional Specifications:
NHDOT Sections 401, 403, and 411 Modified by City of Nashua were not made
available online with the other bidding documents. This document is provided with this
addendum.
IFB0660-040617 5 Addendum 1
