Q-005
Q-006
Q-007
Q-005
Q-009
Q-010
Q-011
Q-012
BONNETTE, PAGE & STONE CORPORATION
91 BISSON AVENUE, LACONIA, NH 03246
TEL: 603.524.3411 Fax: 603. 524. 4641
“Progress on Purpose”
Construction ivianagement ¢ Design/Build Services
Detail 2 on A3.1...
The CMU wall against the existing building (and follows column line 4); at
the top where my LG rafters go, the block does not ascend all the way full
height. Am | to carry some type of support framing there?
We are showing light gauge metal framing infill where the elevator overrun
extends above the existing building roof. It is not structural.
The detail says TOW at CMU is 29’ — 4” but the structural drawings
say 26’ — 10”. Which height is correct?
Refer to Architectural for elevations
Apparatus Bay 101 calls for a painted exposed OH deck. Apparatus Bay
110 does not call to be painted. Is this correct or should both bays be
painted?
Paint both.
Gear Room 112 does not indicate any painting on the room finish
schedule? Please confirm if this is correct.
Gear Room 112 will have painted walls and ceiling
Spec Section 099123, 2.3B, #3: Would Prolndustrial Pro-Cryl Universal
Metal Primer be acceptable in lieu of the All Surface Enamel Primer as the
All Surface enamel is usually only stocked in quarts and is not OTC
Compliant in gallons.
Yes
Spec Section 099123, 2.3C, #3: Would Prolndustrial Pro-Cryl Universal
Metal Primer be acceptable in lieu of the Solvent based Galvite HS for a
more environmentally friendly product that is also designed to prime
Galvanized metals?
Yes
Spec Section 099123, 2.3 Interior Primers does not specify a primer for
CMU. Should we carry Lightweight or Heavy Duty Block Filler?
Heavy Duty Block Filler
Spec Section 099123 does not call out a finish topcoat & sheen for
Ferrous Metals. Please specify the desired coating system.
Benjamin Moore Ultra Spec HP. D.T.M. Acrylic Enamel
2 of 4
Building Pride Since 1969
