Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
Control Panel Manufacturer (or Comments
Components approved equivalent)
Analog Surge Phoenix Contact
Suppressors Citel
Media Converters IN-Tron Furnish with DIN rail mount converters as required
B&B Electronics on the network architecture
L-Com
Fuses Bussman All glass fuses in control panels shall be fast acting
Ferraz Shawmut style. Motor circuit protection fuses shall be time
delay style.
Control Relays Allen Bradley Include all required bases and hardware.
Square D
Omron
Power Supplies Sola Fumish with power supplies sized as required for
Phoenix Contact equipment contained within the enclosures and to
Allen Bradley supply field equipment connected to the enclosure.
Intrinsic Safety Barriers |Pepperl & Fuchs Discrete barriers shall be 2-channel barriers.
MTL Analog barriers shall be 2-wire barriers.
Phoenix Contact
Ethemet Switches Moxa Switches shall be furnished with direct-wired low
(Unmanaged) B&B Electronics voltage power source within the enclosure.
Ethernet Switches IN-Tron All switches comprising the ring topology
(Managed) B&B Electronics throughout the facility shall be furnished from the
Allen Bradley same manufacturer.
Fiber Patch Panels L-Com Furnish with panel mount patch panels for
B&B Electronics incoming fiber optic cables as required
Emergency Power Sola Include uninterruptible power supply (UPS) in each
System Phoenix Contact control panel sized to furnish with at least 10
Meanwell minutes of emergency power.
Panel Heaters Hammond Furnish with panel heaters for outside control
Hoffman panels where temperature is a concem for
electronic components.
Receptacles
Pass & Seymour
Hubbel
Leviton
Fumish with receptacle for UPS and convenience
receptacle in each PLC control panel.
WOODARD & CURRAN
CONTROL SYSTEM EQUIPMENT PANELS AND RACKS
40 67 00-6
