Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
9. The Instrumentation, Systems and Automation Society (ISA)
10. State and Local code requirements.
11. Where any conflict arises between codes or standards, the more stringent
requirement shall apply.
1.04 ADMINISTRATIVE REQUIREMENTS
A. Coordination, Sequencing, and Scheduling: per Division 01 General
Requirements.
1.05 SUBMITTALS
A. Submit in accordance with Division 01 General Requirements.
B. Submit detailed information for the process control panels and enclosures in
accordance with Section 40 61 01.
C. In addition to the requirements of Section 40 61 01, the submittals shall include
the following.
1. Prior to submittal to Engineer, Shop Drawings and submittal information
shall be thoroughly checked by Contractor to insure compliance with
Contract Documents. Contractor shall be responsible for verifying that all
equipment, instruments and materials submitted upon shall fit within
available space and maintain specified physical clearances, and that all
equipment is compatible with the operation of the overall system.
Submittal to the Engineer of Shop Drawings and submittal information
implies that the Contractor has reviewed the information and all
requirements have been satisfied.
2. Bill of Materials for each control panel, including panel tag name or
number, and component description, quantity, manufacturer name and
model number for each component used in the fabrication of the control
panel. The Bill of Materials shall be keyed to easily correlate the
component shown in the Bill of Materials with the component shown on
the control panel Equipment Layout Drawings.
3. Manufacturer’s descriptive literature for each component called out on the
Bill of Materials, clearly designate the part number with highlights or
arrows.
4. Equipment Layout Drawings for each control panel, indicating any
deviations from the Contract Documents.
5. Terminal Block Layout Drawings for each control panel, indicating any
deviations from the Contract Documents.
CONTROL SYSTEM EQUIPMENT PANELS AND RACKS
WOODARD & CURRAN 40 67 00-2
