15.
16.
17.
C-1.13
b. Work done in the absence of the Engineer or his agent may be ordered by
the Engineer to be uncovered or dismantled.
c. Should the work thus exposed or examined prove satisfactory, the
uncovering or dismantling and the replacement of material and rebuilding of the
work shall be considered as “Extra Work” to be processed in accordance with
article 17.
d. Should the work thus exposed or examined prove to be unsatisfactory the
uncovering or dismantling and the replacement of material and rebuilding of the
work shall be at the expense of the Contractor.
Reports, Records and Data shall be furnished as follows: The Contractor shall submit to
the Owner such schedule of quantities and costs, progress schedules, payrolls, reports,
estimates, records and other data as are required by the Contract Documents or as the
Owner, Division or any funding agency may request concerning work performed or to be
performed under this contract.
Superintendence by Contractor shall be furnished as follows: At the site of the work, the
Contractor shall employ a competent construction superintendent or foreman who shall
have full authority to act for the Contractor. The superintendent or foreman shall have
been designated in writing by the Contractor as the Contractor's representative at the site.
It is understood that such representative shall be acceptable to the Engineer and shall be
the one who can be continued in that capacity for the particular job involved unless he
ceases to be on the Contractor's payroll. Such representative shall be present on the site
at all times as required to perform adequate supervision and coordination of the Work.
Extra Work and Change Orders shall be processed as follows:
17.1. The Engineer may at any time by written order and without notice to the sureties
require the performance of such extra work or changes in the work as may be found
necessary. The amount of compensation to be paid to the Contractor for any extra work
so ordered shall be made in accordance with one or more of the following methods in the
order of precedence listed below:
a. A price based on unit prices previously approved; or
b. A lump sum price agreed upon between the parties and stipulated in the
order for the extra work;
c. A price determined by adding 15 percent to the “reasonable cost” of the
extra work performed, such “reasonable cost” to be determined by the Engineer in
accordance with the following paragraph.
17.2 The Engineer shall include the reasonable cost to the Contractor of all materials
used, of all labor, both common and skilled, of foreman, trucks, and the fair-market rental
rate for all machinery and equipment for the period employed directly on the work. The
reasonable cost for extra work shall include the cost to the Contractor of any additional
