Project Number: 228730 WWYTEFE SCADA Upgrades
Issue Date: AugustSeptember 2017 Nashua, NH
e Intrusion Protection capabilities
f. Network Address Translation (NAT)
g. NBAR protocol filtering
h Access Control Lists (ACL)
Quality of Services (QOS) for prioritization
_.
3. Unit shall be Cisco model ASA5506-K9 or approved equal.
4. Provide Cisco model ASA5506-RACK-MNT rack mounting unit
5. Provide Tofino Xenon Xe-02-00-T1-T1-T-DD-Z9-000V for use in main
panel.
6. Provide initial year of all security services, subscriptions and
documentation for transfer of registration if necessary.
E. Rack Mounted Uninterruptable Power Supply (UPS)
1. Provide one (1) UPS designed to bolt to the equipment rack assembly.
2. Unit shall have a nominal input voltage of 120VAC with an output power
capacity of 1900 Watts/1650 VA.
3. Unit shall have maintenance-free sealed lead-acid battery with suspended
electrolyte. Total recharge time shall be 3hrs.
4. Unit shall be equal to APC Model #SUA2000RM2U, Dell or approved
equal.
2042.03 SOURCE QUALITY CONTROL
A. Provide in accordance with Division 01 General Requirements.
PART 3 — EXECUTION
6-04
3.01 INSTALLATION
A. Install cabling and pathway systems, including cable, pathway systems, Data
outlet/connector assemblies, and associated hardware in accordance with all
applicable standards and codes. Provide in accordance with Network Architecture
drawings.
ADDENDUM NO. 3 COMMUNICATIONS
WOODARD & CURRAN 27 00 00-6 _(3)
