wo oN GO Ww FF W N
10
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
TARP
ROLL OFF-TRUCK
. Rated roll off shall have a 60,000 LB. rated capacity minimum.
. Lift cylinders shall be double acting.
. Outside rail to be 8’X4”X1/2” frame profile total length.
. Outside rollers and pins high carbon steel 5 per side.
. Tubular sub frame shall be 4”X3"X1/4”.
. Sheaves will have aluminum bronze bushings.
. Automatic container locks on both sides and rear rollers.
. Cylinder rods shall be nitrided with extended warranty.
. 7/8” cable extra improved 6X37 domestic.
60 gallon hydraulic tank on driver side with shut off & 2” suction line.
Dual hydraulic filters on suction and return with reliefs.
Air shift PTO / direct mount pump at 45 G.P.M. @ 1800 RPM.
Outside cable controls-2 section control valve with relief.
Steel diamond plate fenders, rubber mounted, anti-spray mud flaps.
Sealed beam lighting with plug in wire harness.
Automatic folding ICC bumper.
Hoist safety prop /back up alarm / hoist up alarm.
Front and rear mud flaps.
Alllights & reflectors to meet FMVSS-108.
Roll off equipment shall have a 3 year unlimited warranty.
SYSTEM
1. Tarp system shall be hydraulically controlled.
2. Tarp controls to be mounted inside cab.
3. Tarp shall be of heavy duty mesh construction.
4. Tarp gantry shall be hydraulically extendable up to 156”.
5.
6.
Hydraulic gantry shall have a 6” spring loaded return roller.
Tarp system shall carry a 3 year unlimited mile warranty.
TRAINING
1.
8 Hours mechanic training on truck chassis.
