ROLL OFF-TRUCK
1. Manufactures must list the exact specifications for the piece of equipment they are bidding for in each of the
categories listed. If any additional information is to be supplied regarding any items, the manufacturers
should refer to the number beside the item and type his information on blank pages. Failure to respond to any
item may be cause for the bid to be rejected as “non-responsive”.
2. Manufacturers are encouraged to elaborate on any aspect of their machine not listed in the bid specifications
but such explanations should be typed on a blank sheet of paper.
3. Inclusion of manufacturer’s specifications will not be considered as a substitute for filling in the
specifications. It is encouraged that the manufacturers bid be supplemented by their printed literature.
4. Equipment bid must be new and unused and manufactured in 2015, and be the manufacturer’s latest model.
5, Specified equipment shall be delivered to the City in complete working order within 60 days from the Date
of Agreement, unless otherwise so stated and agreed to by the City.
INTENT: It is the intent of this RFP to produce a Tandem Axle Rolloff Container Truck equipped with
options and features for use at the Four Hills Landfill.
SPECIFICATIONS MANUFACTURERS SPECIFICATIONS
ENGINE
1. 13 Liter engine shall be rated @ 435 HP @ 1800 RPM.
. Engine shall be rated @ 1550 LB/FT @ 1100 RPM.
. Engine shall be equipped with a compression brake.
. Delco Remy 12V 160 AMP 36-S] Alternator.
u F&F WW N
. Right Hand outboard under step mounted horizontal aftertreatment
system assembly with right hand B-pillar mounted curved vertical tailpipe.
. 9 foot 6 inch exhaust system height.
. 13 Gallon Diesel Exhaust Fluid Tank.
6
7
8. Aluminum aftertreatment muffler/tailpipe shields.
9
. Borg Warner (Kysor) rear air on/off engine fan clutch.
10. 1500 Watt engine coolant block heater.
11. Delco 12V 39MT + HD/OCP starter with thermal protection
and integrated magnetic switch.
12. Remote mounted jump start terminals shall be provided.
