Gamehme;
PART 5 - INSTALLATION (Continued)
ADA Rolled - This is the type of edge to meet the requirements of ASTM 1951, Specifications
for Determination of Accessibility of Surface Systems Under and Around Playground Equipment.
The rolled edge will require additional materials in order to provide adequate ADA Wheelchair
access. The total linear feet of the pad will need to be provided if the whole site is to be ADA
compliant.
Keyway Cut - This type of an edge requires a trenched saw cut of 12” wide x %” deep along the
edge of the concrete or asphalt pad. The contractor or customer will be responsible for providing
the keyway cut. There will be a up charge if the poured rubber installer is asked to provide this
cut. The poured rubber will be beveled down into the saw cut where it will adhere preventing the
exposure of a raw edge.
Cure Time - The poured rubber will require 72 hours (3 days) to properly cure. Security is required
by the owner during this time so to avoid unnecessary damages.
PART 6 - WARRANTY:
When used under playground equipment, GameTime's GT Impax recycled poured rubber is
warranted against defects in materials and workmanship for five years.
When used with water play equipment, GameTime's GT Impax recycled poured rubber is warranted
against defects in materials and workmanship for three years provided aliphatic binder is added.
Without the aliphatic binder, the GT Impax recycled poured rubber will carry only one year warranty.
Ask you GameTime representative for a copy of our full GT Impax recycled poured rubber warranty
details.
PART 7 - MAINTENANCE:
Ask your GameTime representative for a copy of our full GT Impax recycled poured rubber
maintenance details.
