Poured in Place
Product Specification
PART 1 - GENERAL
Work Details:
This work includes furnishing and installing GT Impax recycled poured rubber surfacing.
GT Impax recycled poured rubber surfacing shall be poured in place and trowelled to
provide for a resilient, seamless rubber surface installed over the specified base. The
surfacing provider shall be responsible for all labor, materials, tools, equipment, and
applicable taxes to perform all work and services for the installation of the surface. The
surface shall be stable and slip resistant to comply with all requirements set forth in the
Americans with Disabilities Act.
Quality Assurance & Compliance Details:
Impact Attenuation - ASTM F1292-04: |mpact attenuation test results will be provided to the
owner or owner's representative. These test results shall be certified and submitted on the
letterhead of an independent testing lab. Impact attenuation test results shall meet or
exceed Consumer Product Safety Commission Guidelines for impact attenuation (G-max and
Head Injury Criteria (HIC).
Accessibility of Surface Systems - ASTM F1951-08: All Playground surfacing products must
pass testing to ensure wheelchair access under and around playground equipment as
required by the American Disabilities Act.
Coefficient of Friction - ASTM D2047-82: All products must meet a minimum standard on
coefficient of friction of .9-wet, 1.0 dry.
Permeability. Product shall meet or exceed a coefficient of permeability of 0.4 gallons per
square yard per second.
Flammability of Finished Floor cover - ASTM D2859: Product shall meet requirements of
ASTM D2859.
Tensile Strength - ASTM D412-87: This test indicates a product's ability to stretch, and how
far it will stretch before it breaks. Test results for wear course must be a minimum tensile
strength of 60.
