B. Under ITEM E (ALT) — PROTECTIVE SURFACING (RUBBER TILES), remove specification. This
material will not be used.
ITEM “E(ALT)’ — PROTECTIVE SURFACING (RUBBER TILES)
A. SCOPE
This work shall consist of installation of a protective surface material at the location(s) shown on the
layout plan per the detail of the plan set provided or as ordered by the Engineer.
B. MATERIALS AND CONSTRUCTION
The Contractor shall supply all labor, materials, equipment and transportation necessary for the required
work. The depth of material may vary based on the fall height of the adjacent playground equipment
and shall consist of either a poured-in-place rubber system or an interlocking rubber tile system.
Interlocking Rubber Tile System Specifications or approved equal
PART 1 GENERAL
iJ SECTION INCLUDES
A. Resilient, interlocking, playground safety surfacing tiles.
1.2 RELATED SECTIONS
A. Section 02 (32 )- : Granular aggregate
subsurface.
B. Section 02 (32 j= : Asphalt subsurface.
Cc. Section 02792 (32 18 16.13) — Poured-in-Place Playground Surfacing.
D. Section 02880 (11 68 13) — Playground Equipment.
E, Section 03300 (03 30 00) — Cast-in-Place Concrete: Concrete subsurface.
7 ADDENDUM 2
