1. Certificate of qualifications of the surfacing installer.
Closeout Submittals: Submit the following:
1. Warranty documents specified herein.
1.05 QUALITY ASSURANCE
A. Utilize an installer trained and approved by the manufacturer, having experience with
other projects of the scope and scale of the work described in this section.
1.06 DELIVERY & STORAGE
A. Deliver materials in manufacturer’s original, unopened, undamaged containers with
identification labels intact.
B. Store materials protected from exposure to harmful environmental conditions and at a
minimum temperature of 40 degrees F and a maximum temperature of 90 degrees F.
1.07 _ PROJECT SITE CONDITIONS
A. Install surfacing on a dry sub-surface with no prospect of rain within initial drying period,
and within 40 degrees F and 90 degrees F.
1.08 _WARRANTY
A. Playground surface shall maintain required impact attenuation characteristics and be
guaranteed against defects in workmanship and materials for a period of no less than
five years from date of completion of work. Maintenance requirements must be
maintained for duration of warranty period.
PART 2 — Products
A. Playground surface shall consist of synthetic materials meeting the requirements of this
specification. Poured In Place Rubber Playground Surfacing components shall be
installed by a certified installer of the chosen manufacturer.
2.01 _BASE LAYER
A. Primer: Polyurethane.
B. Poured In Place Base: Blend (86% rubber & 14% polyurethane) of strand and granular
100% recycled SBR (styrene butadiene rubber) and polyurethane. Depending on ASTM
F1292 requirements for critical fall height (4’, 5’, 6’, 7’, 8’, 9’ or 10’), select base layer
thickness of 1.25", 1.5" 2,0", 2.5", 3", 3.5", 4.0" or 5.0".
4 ADDENDUM 2
