A. ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Rubbers
and Thermoplastic Elastomers-Tension.
B. ASTM D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber
and Thermoplastic Elastomers.
C. ASTM D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated
Floor Surfaces as Measured by the James Machine.
D. ASTM D2859 Standard Test Method for Flammability of Finished Textile Floor Covering
Materials.
E. ASTM £303 Standard Test Method for Measuring Surface Frictional Properties Using the
British Pendulum Tester.
E, ASTM F1951 Standard Specification for Determination of Accessibility of Surface Systems
Under and Around Playground Equipment.
1.03 | PERFORMANCE REQUIREMENTS
A. Flammability (ASTM D2859): Pass.
B. Tensile Strength (ASTM D412): 60 psi (413 kPa).
Cc. Tear Resistance (ASTM D624): 140%.
D: Water Permeability: 0.4 gal/yd2/second.
E Accessibility: Comply with requirements of ASTM F195].
F, Dry Static Coefficient of Friction (ASTM D204 7): 1.0.
G. Wet Static Coefficient of Friction (ASTM D2047): 0.9.
H. Dry Skid Resistance [ASTM E303): 89.
I, Wet Skid Resistance (ASTM £303): 57.
1.04 SUBMITTALS
A. General: Submit listed submittals in accordance with Conditions of the Contract and
Division 1 Submittal Procedures Section.
B. Product Data: Submit manufacturer’s product data and installation instructions.
G Verification Samples: Submit manufacturer’s standard verification samples of 9" x 9"
minimum.
D. Quality Assurance/Control Submittals: Submit the following:
3 ADDENDUM 2
